Polar WearLink Manuel d'utilisateur télécharger pdf (Page 5)

water solution when needed. Never use alcohol

or any abrasive material (eg. steel wool or

cleaning chemicals).

Strap: Rinse the strap under running water after

every use and hang to dry. Clean the strap

gently with a mild soap and water solution when

needed. Do not use moisturizing soaps, because

they can leave residue on the strap. Do not

soak, iron, dry clean or bleach the strap. Do not

stretch the strap or bend the electrode areas

sharply.

Dry and store the strap and the connector

separately, to maximize the heart rate sensor

battery lifetime. Keep the heart rate sensor in

a cool and dry place. Do not store the heart rate

sensor wet in non-breathing material, such as a

sports bag, to prevent snap oxidation. Do not

expose the heart rate sensor to direct sunlight

for extended periods.

Check the label on your strap to see if it is

machine washable. Never put the strap or the

connector in a dryer!

Batteries

All WearLink connectors have user changeable

batteries. To change the battery yourself, follow

the instructions below, and see the markings on

the connector and picture C on the front cover

of this user manual.

1. Using a coin, open the battery cover by

turning it counterclockwise to OPEN.

2. Insert the battery (CR 2025) inside the

cover with the positive (+) side against the

cover. Make sure the sealing ring is in the

groove to ensure water resistance.

3. Press the cover back into the connector.

4. Use the coin to turn the cover clockwise to

CLOSE.

When changing the battery, make sure the

sealing ring is not damaged, in which case you

ENGLISH 3

1 2 3 4 5 6 7 8 9 10 11 12 13

Commentaires sur ces manuels

Pas de commentaire